top of page
SYLVESTER PRODUCTS INC
Lamination Press Plates
Heavy Matte 200 Series
Heavy Matte
200 Series Stainless Steel
Available in 0.8 mm thickness
Ra 1.3 - 1.4 / Rz 16 - 19
Not recommended for magnetic encoding
Traditional matte plate
200 Series Stainless Steel
Available in 0.8 mm thickness
Ra 1.3 - 1.4 / Rz 16 - 19
Not recommended for magnetic encoding
Traditional matte plate
Light Matte 300 Series
Light Matte
300 Series Stainless Steel
Available in 0.9 mm thickness
Ra 0.20 - 0.24 / Rz 1.70 - 2.60
Flat non-directional finish
Recommended matte for magnetic encodability
300 Series Stainless Steel
Available in 0.9 mm thickness
Ra 0.20 - 0.24 / Rz 1.70 - 2.60
Flat non-directional finish
Recommended matte for magnetic encodability
Ultra Silky Matte 300 Series
Ultra Silky Matte
300 Series Stainless Steel
Available in 0.8 mm thickness
Ra 0.34 - 0.39 / Rz 3.40 - 3.60
Our Finest Matte Finish
Most Recommended for magnetic strip encodability
300 Series Stainless Steel
Available in 0.8 mm thickness
Ra 0.34 - 0.39 / Rz 3.40 - 3.60
Our Finest Matte Finish
Most Recommended for magnetic strip encodability
Heavy Matte 300 Series
Heavy Matte
300 Series Steel
Available in 0.8 mm thickness
Ra 1.32 - 1.3 / Rz 4.68 - 5.20
300 Series Steel
Available in 0.8 mm thickness
Ra 1.32 - 1.3 / Rz 4.68 - 5.20
Dull Mirror 300 Series
Dull Mirror
300 Series Stainless Steel
Hardness BHN 179 / HRC 30
Ra 0.06 - 0.09 / Rz 0.40 - 0.92
Available with 0.8 mm thickness
With or without matte border
Recommended in environments where a high degree of blocking occurs
300 Series Stainless Steel
Hardness BHN 179 / HRC 30
Ra 0.06 - 0.09 / Rz 0.40 - 0.92
Available with 0.8 mm thickness
With or without matte border
Recommended in environments where a high degree of blocking occurs
Heavy Matte 400 Series
Heavy Matte
400 Series Steel
Available in 0.8 mm thickness
Ra 0.98 - 1.06 / Rz 5.77 - 6.61
400 Series Steel
Available in 0.8 mm thickness
Ra 0.98 - 1.06 / Rz 5.77 - 6.61
Mirror 400 Series
Mirror
400 Series Stainless Steel
Hardness BHN 161 / HRC 26.5
Ra 0.08 - 0.15 / Rz 0.60 - 1.80
Available in 0.8 and 1.0 mm thickness
Available with or without matte border
400 Series Stainless Steel
Hardness BHN 161 / HRC 26.5
Ra 0.08 - 0.15 / Rz 0.60 - 1.80
Available in 0.8 and 1.0 mm thickness
Available with or without matte border
Lamination Press Pads
Silicone
Silicone Pads
Surface Material Silicone
Patterned surface for quick heat transfer
Middle Glass fabric layer
Shore Hardness 55 + 5
Tensile Strength 80N/mm
Adhesion 4.5N/mm
Maximum Temperature: 230C
Regulated control over heat and pressure distribution in heat and cold cycles
30% more lifetime over composite pad of felt and rubber
Thickness : 3mm
Surface Material Silicone
Patterned surface for quick heat transfer
Middle Glass fabric layer
Shore Hardness 55 + 5
Tensile Strength 80N/mm
Adhesion 4.5N/mm
Maximum Temperature: 230C
Regulated control over heat and pressure distribution in heat and cold cycles
30% more lifetime over composite pad of felt and rubber
Thickness : 3mm
Heat Resistant Felt
AGT-450-72
Surface Material Heat Resistant Felt
Middle Material - Black Silicone Rubber
Hardness Shore A 55a5
Tensile Strength 60N/mm
Adhesion 4.5N/mm
Maximum Temperature: 200C
Color: White
Thickness: 3.3mm
** For continuous heat, we suggest maximum 180C
Surface Material Heat Resistant Felt
Middle Material - Black Silicone Rubber
Hardness Shore A 55a5
Tensile Strength 60N/mm
Adhesion 4.5N/mm
Maximum Temperature: 200C
Color: White
Thickness: 3.3mm
** For continuous heat, we suggest maximum 180C
Heat Resistant Felt
AAR-5500-W Lamination Pad
Surface Material Heat Resistant Felt
Middle Material - White Silicone Rubber
Tensile Strength 110Min kg
Temperature Resistance: 215C
Color: White Felt
Thickness: 1.8mm - 2.3mm
**For continuous heat, we suggest maximum 200C
Surface Material Heat Resistant Felt
Middle Material - White Silicone Rubber
Tensile Strength 110Min kg
Temperature Resistance: 215C
Color: White Felt
Thickness: 1.8mm - 2.3mm
**For continuous heat, we suggest maximum 200C
All pads
All pads together for reference
bottom of page